-
- Recording engineers and music producers around the world rely on M-Audio
reference monitors to insure that their mixes are accurate. Custom-tuned cabinets, optimized speaker design,
and advanced crossover technology combine with generous built-in amplification
to deliver the best sound you can get in monitors this size. Complete with
magnetic shielding to prevent interference with computer and video monitors,
StudioPro 3 speakers deliver great audio experiences from your music and
multimedia applications.
The M-Audio StudioPro 3 active monitors bring to your
desktop the same standard of audio fidelity found in studios around the world—great
for travelling too.
- 3.25” low-frequency drivers; 1” high-frequency drivers
- Self-powered with 10 watts per channel @ < 0.5% THD
- Remarkably accurate frequency response and imaging
- Advanced crossover design
- Custom-tuned wood cabinet
- Magnetic shielding prevents computer/video monitor interference
- Vented port design for added bass
- Transportable, compact design is ergonomic and flexible
- Internal standing wave acoustic absorption for greater efficiency
- Bass Boost switch
- Factory programmed for worldwide use
- RCA rear-panel inputs; convenient front-panel 1/8" inputs
- Includes directional stands to optimize listening "sweep spot"
Technical Specifications
Type:
- Two-way desktop reference monitor
LF Driver:
- 3.25-inch diameter, magnetically shielded with curved cone with high-temperature voice coil
HF Driver:
- 1-inch diameter, magnetically shielded silk dome
Frequency Response:
Crossover Frequency:
Dynamic Range (Maximum Signal-to-Noise Ratio):
- >80dB (typical, A-weighted)
Input Connectors:
- Left and right line input connectors (RCA)
Polarity:
- Positive signal at "+" input produces outward low-frequency cone displacement
Dynamic Power:
- 10 watts into 4 Ω (per channel) at 0.5% distortion
Input Impedance:
Input Sensitivity:
- 100mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum
Protection:
- RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter
Indicator:
- Blue power LED ring around on/off/volume knob on front panel
Power Requirements:
- 100-120V~50/60Hz, 220~240V~50/60Hz; powered via detachable 2-conductor line cord
Cabinet:
|